Benvenuto sul sito di WEAP
WEAP
WEAP è una iniziativa dell' Stockholm Environment Institute.


A proposito di WEAP

Pagina iniziale
Perchè WEAP?
Caratteristiche
Cosa c'è di nuovo
Schermata esemplificativa
Dimostrazione
Applicazioni
Pubblicazioni
Storia e testimonianze

Usare WEAP
Scarica
Licenza
Manuale
Esempi
Video
Risorse

Forum degli utenti
Discussioni
Lista dei membri
Crea il tuo profilo

Ulteriore supporto
Formazione
Corsi universitari
Collaborazioni

Chi siamo
Programma SEI-US sulle risorse idriche
Contatti

 Notizie sull'Ambiente
LEAP Ti interessa l'Energia?
Informati a proposito di LEAP: Software SEI sulla pianificazione energetica

Forum degli utenti

All Topics | Topic "Diversion Priority"
Log in to post new messages or reply to existing messages.
 
Author Messaggio
Huzefa Haji

Subject: Diversion Priority   
Posted: 12/13/2011 Viewed: 6647 times
Dear All,
I have a system of 3 rivers on which it is proposed to have diversions of different capacities. All 3 diversions will be discharging into a reservoir via a tunnel. The reservoir has an expected yield.

I have set up the model to simulate this arrangement using the Transmission Link with a maximum flow volume. These discharge into the tunnel modeled as a Diversion Link.

However, one major requirement is to have the diversions taking place at different priorities. Therefore, out of the 3 rivers, the 1st priority is to divert water from the southernmost river, thereafter from the next river to the north, and thereafter from the northernmost river.

Any idea how diversions work in WEAP? When having 3 diversions, is the priority of diversion equal across all of them?

Thanks alot!

Regards,
Huzefa
Behzad Sharif

Subject: Re: Diversion Priority   
Posted: 12/17/2011 Viewed: 6601 times
If you want these diversions transfer water as much as possible (considering their maximum flow volume) you had better to use diversions instead of transmission link. Then you can put a virtual "Flow requirement" on each diversion and define the minimum flow requirements equal to their corresponding diversion maximum flows. Then you can prioritize these flow requirements. There are a couple of other solutions if this doesn't help you. Look forward to hearing from you and the result.
Huzefa Haji

Subject: Re: Diversion Priority   
Posted: 12/19/2011 Viewed: 6596 times
Thank you very much for your reply.

I managed to do it via another method using demand nodes. So I put a demand node with the cumulative of all 3 diversion values as its demand, then used transmission links with specific supply preferences and max diversion capacities. A return flow link with 0% consumption value returns all the water into the reservoir. This has given me the results I wanted.

However, your method is simpler! Will do that next time!

Many thanks!

Topic "Diversion Priority"