Tiêu đề: Lake in WEAP đã gửi: 3/30/2010 Đã xem: 23562 times
How can i model a man made lake that is fulled by diversions of a river in the non-irrigation seasons and is used in irigation seasons?
Tiêu đề: Re: Lake in WEAP đã gửi: 3/30/2010 Đã xem: 23561 times
Have a diversion coming off the main river, with a reservoir on the diversion. Upstream of the reservior, place a Flow Requirement. Decide how much you want to divert to the reservoir in the non-irrigation season and set that as the value for the flow requirement in those months. Give the Flow Requirement a lower priority than other demands so that it will only divert surplus water.
Tiêu đề: Re: Lake in WEAP đã gửi: 7/24/2010 Đã xem: 23213 times
Hi Lale iam mohsen mousavi and i work on a marooon basin and i simulate 5 dams in this system and i woundernig if you can help me with this imean to simulate the grounwater in this system.
Tiêu đề: Re: Lake in WEAP đã gửi: 9/10/2010 Đã xem: 23024 times
Generally you can not make a Lake (sink) in WEAP, but you could make a reservoir. Although, your object is not Lake, we say it in Farsi (Ab gir)... isn't it? And it seems that you are working in a project in North part of Iran?!
It doesn't make any difference that how you fill it. As Jack said, you have to fill it by a diversion. But it's sometimes tricky!! when you run it, you will get it! Just note to priorities of your system.
Tiêu đề: Re: Lake in WEAP đã gửi: 9/10/2010 Đã xem: 23023 times
I don't know what do you want to do with Groundwater in Maroon basin, and I do not know that it's a consulting matter or just a research for your thesis and...
Anyway... If you need help, let me know.
Tiêu đề: Re: Lake in WEAP đã gửi: 11/6/2012 Đã xem: 18068 times
Similarly to what Miss Mahmoudian asked, I would like to know how WEAP models the effects of lake level drops to the downstream runoff rivers that flow from the lake.
Tiêu đề: Re: Lake in WEAP đã gửi: 11/6/2012 Đã xem: 18062 times
There is no Sink or Lake feature in WEAP, but you can use reservoir. Once you use reservoir feature, you can control and define water level in the lake and flow in downstream just by some simple rule. To define them, you can use expression builder functions (like IF rules or any appropriate things).
Tiêu đề: Re: Lake in WEAP đã gửi: 11/6/2012 Đã xem: 18058 times
Thank you very much, that works well.