Selamat Datang di Situs WEAP
WEAP
WEAP adalah sebuah insiatif dari Stockholm Environment Institute.


Tentang WEAP

Beranda
Mengapa WEAP ?
Fitur
Apa yang Baru ?
Contoh Screen
Contoh Demo
Aplikasi
Publikasi
Sejarah dan Kredit

Menggunakan WEAP
Unduh
Lisensi
Bantuan Penggunaan
Tutorial
Video
Sumber

Forum Pengguna
Diskusi
Daftar Anggota
Sunting Profil

Penunjang Tambahan
Pelatihan
Program Universitas
Kolaborasi

Tentang Kami
SEI-US Program Sumberdaya Perairan
Silahkan Hubungi Kami

 Berita Lingkungan
LEAP Tertarik pada Energi?
Baca tentang LEAP: Software SEI untuk perencanaan energi

Forum Pengguna

Seluruh Topik | Topik "Setting Supply"
Masuk untuk mengirim pesan baru atau membalas pesan yang ada.
 
Penulis Pesan
Janak Timilsena

Subjek: Setting Supply   
Dikirim: 12/10/2009 Dilihat: 9771 times
I have reservoir, streamflow, groundwater and desalination water as sources. I have a single demand. I would like to set the reservoir to be stored(i.e. no supply from the reservoir) during the some time of the timesteps(wet period of a year), and utlized it during another time steps.

Basically, I would like to supply water only from the groundwater, streamflow and desalination water when the reservoir is not in use. But some other timesteps, I would like to set the reservoir supply as the preferred supply of water, so that the stress on the other water uses can be reduced. Do you have any suggestion to model this thoughts?
Jack Sieber

Subjek: Re: Setting Supply   
Dikirim: 12/10/2009 Dilihat: 9770 times
I suggest setting the Supply Preference to 1 for the reservoir, and set to 2 for the groundwater, streamflow and desalination (or you could order these 2, 3 and 4 if you want), and then setting a flow restriction on the transmission link that connects the reservoir to the demand, so that the maximum flow is 0% of demand when the reservoir is not in use (which will force WEAP to use the other sources), and 100% of demand when the reservoir is in use.

Jack
Topik "Setting Supply"