Καλωσορίσατε στην ιστοσελίδα του WEAP
WEAP
Το WEAP είναι μια πρωτοβουλία του Stockholm Environment Institute.


Σχετικά με το WEAP

Αρχική Σελίδα
Γιατί το WEAP;
Χαρακτηριστικά
Τί νέο υπάρχει;
Δείγματα Εικόνων
Επίδειξη
Εφαρμογές
Δημοσιεύσεις
Ιστορική Αναδρομή και Συνεισφορά

Χρησιμοποιώντας το WEAP
Λήψη
Αδειοδότηση
Οδηγός Χρήστη
Εκπαιδευτικό Υλικό
Videos
Υλικό

Συζητήσεις Μελών
Συζητήσεις
Λίστα Μελών
Επεξεργασία Προφιλ

Πρόσθετη Βοήθεια
Εκπαίδευση
Πανεπιστημιακά Μαθήματα
Συνεργασίες

Ποιοί Είμαστε
Πρόγραμμα Υδατικών Πόρων του SEI-US
Επικοινωνήστε μαζί μας

 Περιβαλλοντικές Ειδήσεις
LEAP Ενδιαφέρεστε για την Ενέργεια;
Ενημερωθείτε για το LEAP: Το λογισμικό του SEI για τον ενεργειακό σχεδιασμό.

Συζητήσεις Μελών

Όλα τα Θέματα | Θέμα "Difference Between Diversion And Transimission"
Log in to post new messages or reply to existing messages.
 
Συγγραφέας Μήνυμα
yongxuan gao

Θέμα: Difference Between Diversion And Transimission   
Αναρτήθηκε: 10/29/2007 Αναγνωσμένο: 14162 times
difference between diversion and transimission yongxuan gao xuangao <a href="mailto:xuan.gao@tufts.edu">xuan.gao@tufts.edu</a>Could anyone tell me what the difference between a diverison and a transimission line is? When should I use which?

Thanks.
Jack Sieber

Θέμα: Re: Difference Between Diversion And Transimission   
Αναρτήθηκε: 10/30/2007 Αναγνωσμένο: 14146 times
Re: difference between diversion and transimission Jack Sieber jsieber <a href="mailto:jack.sieber@sei-us.org">jack.sieber@sei-us.org</a>
A transmission link transmits water from a supply source (reservoir, river node, groundwater node or "other supply" node) to a single demand site. A transmission link can have a maximum capacity, either as a percentage of the demand it is supplying (e.g., 50% of demand) or as an absolute flow rate (e.g., 0.5 cubic meters per second).

In contrast, a diversion functions very much like a river--there can be multiple inflows and outflows, reservoirs, groundwater interactions and flow requirements. Typically, a diversion begins by drawing water from a river or another diversion. WEAP will only pull as much water into the diversion as is required by demands or flow requirements on the diversion. A diversion can have a maximum capacity as an absolute flow rate (e.g., 0.5 cubic meters per second). However, a diversion can not transmit water directly to a demand site--you will need a transmission link to move the water from the diversion to a demand site.

Use a transmission link to move water from a supply to one demand. Use a diversion if you want to model a canal or pipeline that supplies more than one demand site, or that has flow requirements or reservoirs to control the flow.

Jack

> Could anyone tell me what the difference between a diverison and a transimission line is? When should I use which?
Bochra Khozam

Θέμα: Re: Difference Between Diversion And Transimission   
Αναρτήθηκε: 10/31/2007 Αναγνωσμένο: 14138 times
Re: difference between diversion and transimission Bochra Khozam bochra <a href="mailto:bochra@mail.sy">bochra@mail.sy</a>Dear Jack

I think we should use the diversion if we want to control the flow from the river into the reservoir, by flow requirements on the diversion, when we want to storage a defined quantity of water in the reservoir .

Because we can't control the flow from the river into the reservoir by transmission link.

Bochra Khozam
Θέμα "Difference Between Diversion And Transimission"